Best Flag Pole Holder of all Times
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adjustable flag pole holder designed to mount on a 9 inch round column. But I'm sure you could use it on a flat surface.
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 82
- Wydruki
- 0
- Wyświetlenia
- 441
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The base was designed to fit a 9 inch column. The flag holder holds a standard flag pole. It is designed to loosen and rotate at any angle. I suggest printing this with a high strength plastic. However, my beta test is PLA at 15% infill. I'm just curious if it will make it through strong winds. However I suggest printing it out of something with more resistance to heat.
When printing I used supports only on the base. You can see how I set up a model to ensure the most strength. 💪
Threads were based on 6mm. I used two at different lengths.