1 / 1
Keycaps for Kailh Choc V1 switches 16.5mm square
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I like my keyboards ortho, with square spacing of 17mm in X & Y. These are inspired by Chosfox CFX keycaps.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 111
- Wydruki
- 1
- Wyświetlenia
- 860
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (16)Powiązane
These print best on resin printers, and they are very thin. Maybe too thin…
I'd recommend ‘abs-like’ for less brittleness.
I've tried printing on my Creality CR10 S Pro V2 with a Hemera direct drive extruder and volcano hot end. Not good.