1 / 2
Upgraded Picatinny Rails for the nerf Caliburn 4 — zdjęcie 1
1 / 2

Upgraded Picatinny Rails for the nerf Caliburn 4

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Improves the fit of the Caliburn's front picatinny rails.

Ocena
0 / 5
Polubienia
17
Pobrania
97
Wydruki
0
Wyświetlenia
585
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Outdoor Toys
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Captain Slug's files for the Caliburn's rails have a pretty loose fit, so I modified them to have tighter tolerances and holes for set screws. This upgrade really improves the feel of the blaster.

Here's a quick video demonstrating the improvement:

The set screws are the same countersunk 4-40 screws that are used pretty much everywhere else on the blaster.

Note that the STL and STEP files are not oriented correctly for printing, so you need to orient them upright in your slicer.

Printed at 0.2mm layer height on my Prusa Mini in Flashforge Skydiver Blue PLA.

Tagi