Skr mini e3 mount for din rail mounting
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Btt skr mini e3 v2.0 and later for mounting on a din rail for lower profile mounting
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 247
- Wydruki
- 4
- Wyświetlenia
- 796
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
I designed a custom mount for my SKR Mini E3 boards to fit onto my Voron V0.1 using a DIN rail, as I couldn't find suitable models available elsewhere.
My main issue with other models was that the PCBs protruded too far out of the enclosure.
To address this, I made sure the hole placements were compatible with Voron heat inserts, with spacing set at 51mm and 24mm intervals.
The 51mm spacing aligns perfectly with this model:
https://www.printables.com/model/472505-din-rail-bracket-redux
As for the 24mm spacing, I originally found a suitable clip elsewhere, but regrettably, I've misplaced the source link.
Source: https://cad.onshape.com/documents/05a0d67800ee1162cec9b9d8/w/e5c694182e9f58ab5d4ac066/e/b144d6609bd4d4f986cd2544