1 / 2
Vase with roots
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This was an experiment to see if it was possible to have a piece with the supports as decoration
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 87
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This was an experiment to see if it was possible to have a piece with the supports as decoration. So I've designed a simple vase and did a play around on the BambuStudio to see if I could print the vase with root to look like a tree.
Feel free to explore the supports parameters to have your own root types.
Take in cosideration the following
- Top Z distance: 0
- Bottom Z distance: 0
- Top Interface spacing: 0
- Support/Object xy distance: 0
- Support Wall loops: any number >0 to give more resistance
- Tree support branch diameter: play around with number to more or less curvy (lower the number, less curves on the supports)