Osprey buckle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement buckle for (some) Osprey (and probably others, but only confirmed by me for an Osprey Talon) backpacks.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 43
- Wydruki
- 0
- Wyświetlenia
- 570
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a replacement buckle for (some) Osprey (and probably others, but only confirmed by me for an Osprey Talon) backpacks. This is replacing the buckle on the bottom of the shoulder straps. Made for 20mm wide straps.
This part needs an additional non-printed dowel of 4mm diameter and 26mm length, I used a 4mm aluminium rod, but you'd probably get away with a wooden one if that's what you can find.. The reason for this is to be able to replace the buckle without cutting and having to re-sew straps on the pack itself. Inserting the dowel needs quite a bit of force, so depending on accuracy of your printer you might need to file the part slightly.