FPV Drones Stack Cooler
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Used to cool FPV drone VTX's while setting up configuration in Betaflight.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 404
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Public Domain
This is a quickly designed stack cooler to run air through the stacks of quads so VTXs don't over heat while setting them up in betaflight. I just used slots to slide two 40mm fans in from the bottom and then hold them in with tape because I'm too lazy to design in screw holes. Need lots of supports to print this with PLA. Feel free to remix in anyway!
Goal was to get something functional and work with minimal effort, but thought someone else might be interested.
Fans:
https://www.amazon.com/dp/B0711FVD48?psc=1&ref=ppx_yo2ov_dt_b_product_details
Voltage Regulator (12v output and can handle 6s input):
https://www.amazon.com/dp/B093WYTX37?ref=ppx_yo2ov_dt_b_product_details&th=1