OrangePi R1 Case (with rotary encoder and display)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a case for the OrangePi R1 with two different tops. One is plain and one is with a rotary encoder (KY-040).…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 160
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a case for the OrangePi R1 with two different tops. One is plain and one is with a rotary encoder (KY-040). Get the knob here: https://www.thingiverse.com/thing:3068394
I added some support to the SD-Card slot, this has to be removed after printing.
Note: There is no slot for the WiFi antenna, as I will not need this for my project.
Next step will be to add a display (SSD1306) to the top. A first, untested version is available.
Print Settings
Printer:
Fabrikator 2 Mini
Rafts:
No
Supports:
No
Resolution:
0.2
Notes:
To get a good fit I printed this with 110% filament extrusion.
Category: Electronics