1 / 7
Toyota Tacoma Shovel Holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Two brackets to hang your snow shovel from the bed struts. Two types of strut brackets provided.
- Ocena
- 0 / 5
- Polubienia
- 79
- Pobrania
- 244
- Wydruki
- 0
- Wyświetlenia
- 2679
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (5)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (0)Kolekcje (112)Powiązane
I got tired of my snow shovel sliding around the bed, so made some simple hangers to mount the shovel to the OEM strut rails. Includes two (2) types of strut blocks:
- T-Slot Block = Most secure, but must slide in the whole way. If you have existing items in the rails, you'll need to remove them to use this.
- T-Slot Twist Block = Edges are rounded appropriately to allow you to insert & twist the block.
The brackets and t-slot blocks all have raised center portions to help self-center the parts to the strut.
Installation Instructions:
- Insert a ¼" x 1" bolt into the blocks and mount each bracket, adjust as needed for your particular shovel.
- You might need to adjust the model for your particular shovel if you want a tighter or looser fit. Mine slightly “snaps in” for my shovel. Refer to attached .f3d Fusion 360 file if you want to modify for your own use.
Printing Instructions:
- No supports needed, print with PETG or ABS.