Star Wars Nihil Strikeship
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles & Machines
- Licencja
- Creative Commons — Attribution
The Nihil Strikeship appeared in the Star Wars main comic run (2020-) #29.
| Dimensions | Length | Width | Height |
|---|---|---|---|
| 86mm | 63mm | 17mm |
The model comes with an articulated stand. Alternatively, it is also compatible with a big pin and base.
Print Instructions
Printed at 0.15mm layer height.
The ship is “nihil strikeship-main”. It requires supports. Organic supports are recommended.
The stand consists of “nihil strikeship-stand arm” and “nihil strikeship-stand base”. The base uses two filament changes.
Printing the long panels at the back could be problematic. They turned out fine on my print, but if you are having trouble, try using the split version: “nihil strikeship-bow” and “nihil strikeship-stern”. Also requires supports.
If you want to support me, you can do so via this link: https://ko-fi.com/printingdaniel#