1 / 3
Tyre Pressure Monitor Mount — zdjęcie 1
1 / 3

Tyre Pressure Monitor Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Replacement mount for wireless tyre pressure monitor on motorbike

Ocena
0 / 5
Polubienia
6
Pobrania
32
Wydruki
0
Wyświetlenia
299
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial

I had a wireless Tyre Pressure Monitoring System (TPMS) mounted on my motorbike handlebars.  During one of the many times I fell off whilst out adventure riding recently, the mounting clamp for the TPMS became damaged beyond repair.  The TPMS itself was undamaged.

Rather than buy a new TPMS, I designed a replacement mount for TPMS to go on the GPS bar on my 'bike.  The replacement mount looks (and works) nothing like the original.

I printed it in Red PETG because of the red fuel tank on my bike, and of course it'll make my 'bike go faster :-)

Print them in the orientation shown in the 3mf file or the gcode file (not as the STL files indicate).  Enable support material.  You'll need four M5 x 25mm bolts and nuts to install it.  It was designed for mounting on a 22.3mm (or ⅞") diameter bar.

Edit: I designed this in OnShape.  I've included the STEP file for those who may want to tinker with it.  Enjoy !

Tagi