BRANCOPAN - Counter Dial (high detail)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a new counter dial, printable in PLA, for the Brancopan camera.https://www.cameradactyl.com/brancopan I…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 18
- Wydruki
- 0
- Wyświetlenia
- 189
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Share Alike
This is a new counter dial, printable in PLA, for the Brancopan camera. https://www.cameradactyl.com/brancopan
I printed this with a line width of .08 and had it print VERY slowly (I print at 50). This will give you the detail you need for such small numbers.
After printing, I use sugru to fill the numbers and the marker lines with a contrasting color. However crayon or wax will also do in a pinch. https://sugru.com/
Print Settings
Printer Brand:
Creality
Printer:
Ender-3 S1
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.08
Infill:
25%
Notes:
Print very slowly, I did mine at 50. Also, do a lot of infill, it helps keep the resolution up.
Post-Printing
Category: Camera