Card holder - 2 levels
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple card holder with 2 levels, designed for people with hemiplegia needing something stable when playing cards.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 117
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
A simple card holder designed for people with disability.
I made it for someone who is has an hemiplegia and can only play with one hand. He needed a card holder stable enough so he wouldn't flip the holder on the table.
There are ‘lighter’ versions of card holders that are great, but he needed something quite stable and large.
This models uses quite a bit of filament compared to other models that have a lighter base, this was done on purpose to be able to make it stable enough.
The cards are tilted back slightly to allow easy prehension.
I printed it in:
- PLA 1.75mm
- Nozzle 0.4mm
- Temperature 220 degrees