DOILYBOWL - Flexible, low-cost, and cute containment!
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A more mass-producible 3d-printed bowl. Printed flat and heat molded. Perfect for gifting chocolate!!!
- Ocena
- 5 / 5
- Polubienia
- 39
- Pobrania
- 96
- Wydruki
- 1
- Wyświetlenia
- 433
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
This was an exercise in making a mass-producible bowl! Since it's only two layers thick the bowl remains flexible despite being made of PLA. (This is the only properly-springy PLA print I've made!)
I used these bowls as part of the packaging for chocolates that I gave away. A low-cost, fast, and flexible print perfect for little gifts! (although the main goal is to prevent a bag of chocolates from looking like a bag of poop…)
The doilies can be printed quickly and then heat molded with the mold provided. I used a hair dryer to soften the PLA until it almost felt like fabric, and then placed it on the inner mold (upside down). Then I pressed the outer mold over it, and in a few seconds the bowl sets into shape!
The doily itself could be printed larger to be used as a placemat if your printer has the size for it. I might use this model to make dinner-table placemats for next Valentine's Day <3
Doilies are printed in two layers at a 0.2mm layer height. Doilies shown are printed in Polymaker PolyTerra matte PLA.
Happy printing! But do be safe and do your research before printing for contact with food.