1 / 10

Snipper / Flush Cutter Protector Print In Place

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Dehapro

@Dehapro_126169

Using snipper/flush cutter is dangerous. Not only that but also to clean up the flung supports is a pain in the neck.

Ocena: 5 / 5
Polubienia: 14
Pobrania: 38
Wydruki: 1
Wyświetlenia: 1189
Oceny: 1

Aktualizacja u źródła: 27 wrz 2021

Informacje o modelu

Źródło: Printables
Kategoria: Accessories
Licencja: Creative Commons — Attribution — Share Alike

Szczegóły Pliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 1)Remiksy (0)Kolekcje (26)

Update

Updated version with better visibility.

Introduction

Most 3d printers come with a snipper/flush cutter.

3D makers out there, like you, knows that using snipper/flush cutter is dangerous. Not only that but also to clean up the flung supports is a pain in the neck.

Disclaimer : Protective eye cover is still recommended to be used with this protector. It is mainly designed to reduce the mess of flung supports.

This model is Print-In-Place and snaps onto the snipper's hinge pin. Fits a normal snipper that comes with a 3d printer.

Please don't mind my snipper's handle. It's a 5 years old snipper and still works fine.

Instruction

There are two models available. One is fully 3d printed and one with a window for a better visibility. Still have some plastic sheets laying around from making face shields? Why not we make use of it.

Fully 3d printed version

Simply print and snap on to the snipper's hinge pin and you're good to go.
Use index finger to fold in and out for usage.

Window version

Plastic sheet (used on face shields) is needed for the window.
Cut out the plastic sheet into 42 x 20 mm.
Slide the plastic sheet on to the protector.
Snap the protector on to the snipper's hinge pin.
Use index finger to fold in and out for usage.