1 / 3
UV Flood Light to 5 Gallon Bucket adapter shim — zdjęcie 1
1 / 3

UV Flood Light to 5 Gallon Bucket adapter shim

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A simple shim to adapt the flat yoke of a mini UV floodlamp to the curved side wall of a 5-gallon buck.

Ocena
0 / 5
Polubienia
9
Pobrania
17
Wydruki
0
Wyświetlenia
212
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

A simple shim to adapt the flat yoke of a mini UV floodlamp to the curved side wall of a 5-gallon buck to make a cheap curing station.

 

This bracket is for mini flood lamps like the kind that are found in UV light and solar turntable combos. 

Link to Kit: https://www.amzn.com/B083ZFH24H/

Additionally you will need:

  • 4x  M4x6 screws
  • 4x  M4 washers
  • 4x  M4x4.7 heat set inserts

 

Printing and assembly are dead simple so use your best judgment for settings and heat set the inserts in the only holes available. As for mounting to the bucket, illuminate the inside with a flashlight, hold the bracket in place, and mark out the approximate hole locations on the outside. Then use a drill or soldering iron to punch a couple of holes.

Tagi