Meshtastic rugged box for RAK 19007
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of the rugged box for a RAK19007 with magnetic base & two 18650 cells
- Ocena
- 5 / 5
- Polubienia
- 115
- Pobrania
- 512
- Wydruki
- 4
- Wyświetlenia
- 5816
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I remixed the excellent Rugged Box to hold my mobile, temporary installation Meshtastic box.
It currently holds 2x 18650 batteries in parallel and has space for 4 magnets so you can stick it to a steel surface. The plate is modeled for a RAK Wireless 19007 but the plate is seperate so it's easy to exchange if needed. There is enough space to plug in a USB-C for charging if you use a cable witout a bulky connector.
Use some superglue to hold the magnets in place, and if you like, the RAK plate too. I didn't glue mine so I can change it if needed and it stays in place very well just on the friction fit alone.
Update 27-02-2024: the lid is updated with space for some velcro (max 8mm) or a ty-wrap to hold the 18650 in place even if you drop it.
Parts list:
4 of these SbM-209 battery springs:
4 magnets sized 20x4mm
I used this antenna but there are certainly more options:
https://nl.aliexpress.com/item/32811159710.html
The antenna hole is sized at 10mm but that's easy enough to change in the Fusion 360 design.