1 / 3
Firefighter set
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fire extinguisher toy for little firefighter. Backpack with "extinguisher stuff" connected with hose connected to nozzle
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 514
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Toys & Games
- Licencja
- Creative Commons — Attribution — Noncommercial
You'll need for this project:
- Approx. 1m of electrician's flexible tube - 20mm outer diameter [link]
- 2x empty bottle from Lidl Ice Tea (or equivalent with 40mm diameter cap)
- Red spray paint
- Some zip ties
- Some thin rope
How to make:
- Print the fire nozzle gun left and right side, and glue them together
- Print the cap holder and buckle holder
- Use the spray paint on the bottles without label tag to make it red
- After drying, use zip ties to tie two bottles together. Do a four zip tie loops for the rope connection.
- Tie up the thin rope to zip tie loop
- Connect and glue the flexible tube to the fire gun and to the bottle holder
- Connect and glue the bottle holder to bottles. If your distance between bottles does not fit to the holder, tighten the zip ties, to squeeze the bottles together.
- ???
- Profit - Happy kid :)
If you are struggling with the pipe fitting, try to sand it down with some sand paper, and use some force.