1 / 2
Gridwall Leg Clamp — zdjęcie 1
1 / 2

Gridwall Leg Clamp

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a clamp to easily attach the legs to gridwall.

Ocena
0 / 5
Polubienia
28
Pobrania
128
Wydruki
0
Wyświetlenia
1191
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

My mother-in-law does craft shows and she was having trouble with the way the legs attach to the gridwall. I designed this so she could just slide the legs on the gridwall and they latch in place. The hinge pins are just 10d nails cut down to the appropriate lengths. The pins (cut down nails) should fit tightly in the clamp and main bodies and be a nice slip fit in the pivot body. You will need a total of four assemblies to attach a pair of legs to a piece of gridwall.  I used PETG to print since the main body has to flex a little bit to clamp.

Tagi