Tapo C100/C110 Right-Angled Wall Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An angled bracket that allows you to mount a Tapo C100 or C110 camera to a wall or other vertical surface.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 118
- Wydruki
- 0
- Wyświetlenia
- 996
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
An angled bracket allowing you to mount a Tapo C100 or C110 to a wall or other vertical surface. You can either have the camera platform face upward or forward - either will work. The pegs on the bracket fit in the mounting holes on the camera base.
I've included files in various formats to hopefully allow for easy modification, but this is based on the reference mount I designed previously so if you plan to do some heavy modification to the design then that may be a better starting point.
I printed this on its side with supports enabled. If you use the smallest tapered head screw from an Ikea Fixa set then the screws will sit flush, but really any screws you want use should work fine.