Hakko FX-888(d) tip clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clip for the Hakko FX888(d) Iron holder(FH-800) to hold all your tips.
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 90
- Wydruki
- 2
- Wyświetlenia
- 405
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
After you have ascended and bought the based chisel tip you may be looking for a place to put the conical tip, (no not the bin). This clip offers a neat solution without losing the tip cleaner.
3, 5 and 8 tip variants in both left and right for holding up to 16 tips
Holes are designed to clamp well enough to stop the tip from coming out even if upside down but still allow 1 handed operation. After printing if the holes are too tight, you may need to deburr the inner edge of the holes, or just run the tips in and out a couple of times to get the holes worn in.
Printing
Print with the lip facing down on the build plate.
Support - Required underneath the inner clip.