M41A Pulse Rifle Wall Display Kit

Step files included so mod to your heart's content:

So this items is 3 separate things, a bracket that the under barrel of Andrew's awesome design rests on (behind the pump) and the other square bracket is designed to hold the body behind the grip. The brackets are in 2 parts to allow the printing without any support and the layer lines to be in the direction of load. You will need 4 M3x7.5 hex screws to hold the brackets together. The cosmetic plate on the front needs 2 more M3 screws (this is purely to match the theme of the rifle and serves not useful purpose). You need TWO baseplates

The sign is similar and the holes in the model are basically cosmetic for the same M3 screws, You need 2 side panels. The sign bracket sits as seen in the photo where it is tilted upwards below the rifle. And yes, the WY logo isn't the manufacturer, but the canon didn't have a logo for them, and the movie kind of centers around WY's actions. Anyway you will need 12 of the M3 screws 4 for the purely cosmetics on the front and 4 to hold each side plate on. The engraved sign is made via laser engraving on the Johnson Plastics Brushed Metal Acrylic.

So BOMs as follows:

Sign:

Sign x1

Side panels x2

M3x7.5mm x12

Wall Brackets:

curved bracket x1

Square bracket x1

Baseplate x2

COsmetic plate x1

M3x7.5mm x6 (note 5mm long works fine in both models)

For paint I used the Montana Gold Hemp with Silver Rubnbuff on a gloved finger, Burnt Umber oil paint wash and Vajello Rust Pigment (dry pigment)