Weatherflow Tempest Base Station Wall Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A wall mount for the Weather Flow Tempest Base Station
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 485
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution
I was surprised to learn there were no existing models I could use on Prusaprinters. I created this very quick and dirty wall mount for the Weatherflow Tempest Base station. This mount allows you to use two small screws to fasten from the bottom onto the bottom edge of a weatherboard. There is very little weight in the base station so it could also use double-sided adhesive.
I am unhappy with the amount of support material required and also the chamfer I used. Plus I made the screw holes too small. However, I was so short on time so I am including the Fusion 360 model so you can adapt this to your own needs.