Pixel Watch Charging Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A charging stand to mimic watch pillows for the 1st Generation Pixel Watch
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 29
- Wydruki
- 0
- Wyświetlenia
- 281
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Years ago, I wanted a stand for my huawei smart watches but didn't like the options available. I ended up designing a stand out of wood and mimicked the watch pillow it originally came with to make my stand. Eventually, getting a Pixel Watch, I wanted to keep that style but did not want to hand make it out of wood again, so next best thing was to 3d print it. Comparing my measurements from the wood concept, I was able to translate it into autocad and create a template.
When loading into your slicer of choice, be sure to convert it from inches or load it in as an stl with imperial units.
Stand should be printed with the charging cable channel facing down as in the attached image and you could try printing it without supports, but ideally should at least use tree supports to avoid any issues with the overhangs in the cable channel.
The charger slot is pretty tight so the charger should just pop in.
I have included both a single and dual base to go with the stand.
The Bases should be printed with the cable channel on the top to avoid needing supports