Easy Bin + Holder for 3D Printing waste and more
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple Bin and Holder Set for 3D Printing waste, storage and more!
- Ocena
- 4,5 / 5
- Polubienia
- 7
- Pobrania
- 95
- Wydruki
- 2
- Wyświetlenia
- 465
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
My 3D Printing workspace got really dirty after a lot of small prints, i needed a place where i can put my 3D printing waste in a reusable way, now here it is. Its just 2 prints that need to be printed that need a bit of time depending on the wall thickness, i created 1, 2 and 3 mm thick buckets. The Holder needs to be attached with screws on the bottom, or top of a table. Once mounted slide in your chosen Bucket and have fun organizing!
Bucket diameters:
Width: 185 mm
Height: 170 mm
Depth: 110 mm
Thickness: 1, 2 and 3 mm
My print settings:
Material: PLA
Layer Height: 0.3mm
Infill: 30% (more is better)
Total print time: 18 hours
Printed the 3mm one