1 / 2
Creality K1 5015 BentoBox Mount — zdjęcie 1
1 / 2

Creality K1 5015 BentoBox Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Left side mount for the BentoBox air scrubber with 5015 fans

Ocena
0 / 5
Polubienia
16
Pobrania
50
Wydruki
0
Wyświetlenia
1509
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a side mount for running 5015 fans with the BentoBox air scrubber. I tweaked it as much as I was comfortable with to minimize build height loss, but it still cuts it down around 25mm. I keep a bunch of junk in the bottom of my printer anyway though, as I've never needed the full build height. Someone smarter than me could probably redesign it to mount the fans vertically, so there's no build height loss. There's no cord hole, I didn't like the original one so I erased it. A cylinder or cube scaled to the size you want and added to the model as negative volume is an easy way to add a hole to the print, or just drill it like I did. In my case, a 10mm hole was perfect to press fit the jack for the fan power adapter I used. Any other information you need can be found on the models I remixed