1 / 2
Jeep TJ Spare tire bumper spacer — zdjęcie 1
1 / 2

Jeep TJ Spare tire bumper spacer

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Bumper extension for the tailgate of a Jeep Wrangler TJ to support the spare tire.

Ocena
5 / 5
Polubienia
14
Pobrania
132
Wydruki
0
Wyświetlenia
634
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a spare tire bumper extender for a Jeep Wrangler TJ tailgate. (Mine is a 2002, but I believe this will work for most TJ models).

It is a spacer for the spare tire bumpers if you have changed the rim offset or tire size so that the bumper will still contact the spare tire to support it and keep it from bouncing around.

This requires longer bolts and re-use of the factory bumpers.  It is just an extension to sit between the tailgate and the factory bumper.

The model is 26mm tall, but it is likely that you need a different size spacer.  Just use your slicer to cut off the bottom of the model leaving the length you need.

The top of the model has a small fillet around the screw hole to allow for the factory bumper which likely as a small bulge.

 

I printed them in on a Bambu X1C in TPU95 at 75% infill and they came out with similar squishiness to the factory rubber bumpers.

I have included a step file in case you want to play with the model.

Tagi