Orange Pi 5 Plus Case v2
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Needed a case for this board in my Belabox IRL Backpack, designed to be fairly rigid while using minimum space.
- Ocena
- 4 / 5
- Polubienia
- 16
- Pobrania
- 243
- Wydruki
- 0
- Wyświetlenia
- 1794
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution
v3 Cable support model uploaded as a separate model with a few options.
Needed a case for this board in my Belabox IRL Backpack, designed to be fairly rigid while using minimum space.
Printed in PETG with .4mm nozzle
The board is press fit, and case is sealed with 4 Flat M3 screws, optional 5v 3007 fan that is press fit as well.
2024-11-10: Reduced bridging further, Added NVME compatible option ( untested ), Mic/SD/USB 3 side cleaned up
2024-03-04: Reworked for less bridging on side hexagonal patterns
2024-02-26: Adjusted USB-C opening area, Added Version with USB-C support, Added lid with no fan mount.