Baofeng UV-5R Wall Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Baofeng UV-5R Wall mount that uses the clip of the radio to hold onto the mount, attached to the wall with 2 to 4…
- Ocena
- 5 / 5
- Polubienia
- 58
- Pobrania
- 394
- Wydruki
- 1
- Wyświetlenia
- 1781
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
A Baofeng UV-5R Wall mount that uses the clip of the radio to hold onto the mount, attached to the wall with 2 to 4 screws
Note:
I do not recommend using adhesive tape, because the radio is heavy enough that it could pull down the mount over time
You don't have to use 4 screws. I recommend screwing in only the top screws into the wall or using nails with the nail version of the mount, which has smaller holes to accommodate nails.
This design contains the logo of Baofeng Tech, the righful owner of this logo. Visit them at www.BaoFengtech.comPrint Settings
Printer:
Prusa Mini
Rafts:
No
Supports:
No
Resolution:
200
Infill:
38
Filament: PolyMaker PETG How I Designed This
Tinkercad
God knows I cant use SolidWorks
Category: Other