1 / 4
Lifefitness F3 Treadmill Frame Cap, 8131601 — zdjęcie 1
1 / 4

Lifefitness F3 Treadmill Frame Cap, 8131601

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The Lifefitness treadmill endcaps can easily break off because they have long, injection molded screw inserts. This…

Ocena
0 / 5
Polubienia
0
Pobrania
27
Wydruki
0
Wyświetlenia
233
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Sports
Licencja
Creative Commons — Attribution

The Lifefitness treadmill endcaps can easily break off because they have long, injection molded screw inserts. This replacement press-fits into the end pipe and latches on.

The right side is provided. To print the left side, scale it -100% in the X direction.

Updated March 21, 2021 to have correct length.

WARNING: After a while I found they can slip out easily if you step on the edge and you have to kick them back in. Need to update with screws.

Print Settings

Printer Brand:

Creality

Printer:

Ender 3 Pro

Rafts:

No

Supports:

Yes

Resolution:

0.2

Infill:

15%


Filament:

AMZ3D PLA Black

Notes:

Print as oriented (upside down). Supports are needed only from build plate to the top cover.

Use 1.6mm walls for strength, and 15% Gyroid infill.

How I Designed This

I took measurements with calipers and modeled it in Fusion 360. After a few test prints of just the part that goes into the tube, I managed to find a design that will press-fit inside.

Category: Sport & Outdoors

Tagi