neptune 4 pro & normal version beacon rev d and h
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
mount to attach beacon3d rev d or h to the neptune 4 pro
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 46
- Wydruki
- 0
- Wyświetlenia
- 1124
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
WARNING: You must remove the big fan assembly from the x axis !
WARNING: there is 1 to 2 mm space between the beacon and the z gantry when you home x. TEST MANUALLY WHETHER YOU HAVE ENOUGH SPACE BETWEEN BEACON AND Z GANTRY
Does NOT work with low profile beacon!
Beacon cable must be routed from the beacon under the x gantry to the front and then up along the original cable bundle.
BoM:
2x m3 heat insert of 4mm height
Info: users have remarked that the neptune 4 mainboard is too slow to run a beacon on it, will be tested.
First draft of a mount for beacon revision h & d
Distance beacon to nozzle in z is about 3mm
offset in mm:
x= -24.45
y= 29.70
Copyright:
STL of the extruder is owned by elegoo (www.elegoo.com), STL was distributed by them on their discord server
STL of the beacon id owned by beacon3d and obtained from: https://docs.beacon3d.com/installation/