PrusaLink Raspberry Pi Cover with Adafruit CSI/DSI Thingy Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a Raspberry Pi Zero Cover for the MK3 that includes a mounting point for the Adafruit CSI/DSI cable extender
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 267
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v2.0
This is a Raspberry Pi Zero Cover for the MK3 that includes a mounting point for the Adafruit CSI/DSI cable extender.
Note: since the cover will no longer flex, it is a bit trickier to get into place, you'll want to insert the top two tabs above the Raspberry pi, get those seated, and then press the lower two tabs into place.
I recommend printing at 100%, and slow it down to maximize layer adhesion, the tabs can be a bit fragile. I've also included the .f3d file since you may need to tweak the hole size for your heat set inserts.
Hardware Required:
- Adafruit CSI/DSI Extender: https://www.adafruit.com/product/3671
- 2 x M2x4mm heat set inserts
- 2 x M2x4mm screws