mmu2s finda selector with retention spring for steel ball
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
mmu2s finda selector with retention spring for steel ball
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 64
- Wydruki
- 2
- Wyświetlenia
- 1470
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution
This is a remix of the original mmu2s selector from prusa.
I always had problems with the reliability of the finda sensor in the selector. I first tried the mod with a magnet e.g. https://www.prusaprinters.org/prints/48794-prusa-mmu2-selector-magnet-upgrade-r2 . Since the steel ball is not very magnetic, it wasn't much of an improvement.
A solution like the IR Sensor/lever assembly in the extruder would be ideal but is to big a project for me. So I solved the problem with a simple spring-steel spring. Since I installed the mod I didn't have a single error reading from the finda sensor.
The spring is very simple and can be bend with regular pliers (e.g. the one that came with printer). I used 0.5mm springsteel which I bought on ebay. The pretension can be adjusted by bending the spring more.
I also made the cones at the filament path beginning and end a bit bigger.
Here a small video
The unmodified prusa scad file can be found on github
https://github.com/prusa3d/Original-Prusa-i3/tree/MMU2/