Cut-Out Cover for AMS Riser V2 by maCyo42
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is just a simple insert to cover the holes in the AMS Riser V2 by maCyo42 intended for tool attachments.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 236
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This is just a simple insert to cover the holes in the AMS Riser V2 by maCyo42 intended for tool attachments. I didn't intend to use the tool attachment holes and preferred to have them covered for a more complete look.
I printed them on the side with support material to more closely match the layer lines of my AMS Riser however, it can be printed flat if you desire. There's a small notch at the bottom of the pieces so a flathead screwdriver can be used for easier removal of the covers if desired.