Engl Z9 Midi Pedal Topper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Design for midi toppers for the Engl Z9 midi foot switch. This may work with other Engl foot switches.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 215
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Public Domain
| The foot switch buttons on the Engl Z9 midi foot switch pedal are not a standard measure like a stompbox pedal is. They are actually rounded and have a different diameter. When designing this, I factored in travel movement so the switches wouldn't pop off when pressed. They are working great. Enjoy! |
Main button: Printed in PETG, face down on the textured spring steel sheet. Nothing special needed other than an emphasis on printing the button face down so the logo is facing down which makes the face stick well and gives it a nice texture. I used Prusa Orange PETG to print this. Inset text: Printed in Prusa PLA on the smooth sheet. I also printed this face down. Do not use skirts or brims that are connected unless you want to carve them away with a knife. I turned them off. A fine tuned printer makes for a nice fit for this to go into the button. I needed no glue and tapped it into the topper, gently, with a hammer. |