Weighted Companion Cube (Portal 1)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Weighted Companion Cube from Portal 1 Parts are separate and pre-tolerance in various scales.) just glue them together
- Ocena
- 5 / 5
- Polubienia
- 121
- Pobrania
- 348
- Wydruki
- 8
- Wyświetlenia
- 2477
- Oceny
- 9
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution
I introduced the kiddos to Portal recently and wanted to make them some companion cubes but couldn't find one that seemed accurate to the game and easy to print and assemble without multi-color printing so I made this.
Nothing requires support and should print as oriented. These should also have enough tolerance baked in for most printers.
I've only personally tried the 25mm and 50mm sizes because that's what my kids wanted, but I've pre-toleranced (.2mm where needed) several sizes let me know how the bigger ones go!
Included sizes are:
- 25mm (~1")
- NOTE: this one was pushing it on a .4mm nozzle still but worked in draft mode
- 50mm (~2")
- 75mm (~3")
- 100mm (~4")
- 150mm (~6")
- 200mm (~8")
Pink Parts:
- colorCore - x1
- heart - x6
Gray Parts:
- innerShell - x8
White Parts:
- cornerCap - x8
- edgeCap - x12
- heartCircle - x6
For the final assembly, I just used super glue. All the parts key to each other for easy assembly.
Note. The pockets for the hearts are a little extra deep to account for any material sag without support so I recommend press-fitting the hearts into the heart circles and gluing them in together so the heart and heart circle remain flush (they appear more or less painted on in the game)