Thule Chariot Bottle and mug holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bottle / mug holder for Thule chariot
- Ocena
- 5 / 5
- Polubienia
- 30
- Pobrania
- 326
- Wydruki
- 4
- Wyświetlenia
- 2355
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Share Alike
Holder designed to clip on the Thule Chariot top aluminum extrusion.
It's a two parts design. The clip and the bottle holder. Work great with Yeti 30oz rambler and Takeya 22oz and Takeya 24oz water bottle. The mug holder work ok for Yeti 10oz lowball. It will work with any brand, the holder doesn't care about the bottle branding ;). It's not grasping the bottle so it's better for light duty usage like walking. The holder doesn't obstruct the seats recline neither the handle swivel.
Bottle : ID 85mm x 80mm
Mug : ID 96mm x 44mm
Print with support for all parts (dovetail area). The clip should be printed on it's side and both the mug and bottle standing up. The part fit is really really tight. No need for extra gluing. There is a side hole for driving a hot 18ga nail in to secure the parts together but I didn't need it for the 4 assembly I made. Perfect fit when printed with my Prusa i3 mk3 using PETG but some sanding was required using an Enders 3 v2 with PLA.
Recommended Material: PETG (temperature resistance)
Also work with PLA (tested) but in colder climate or without direct sunlight.