Inland Adapter for RepWinder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A RepWinder compatible adapter to mount a spool of Inland Filament (which is wound in reverse).
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 267
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
Due to local availability, I get a lot of Inland brand filament. Other times I'm using Prusament. Because of the winding direction of the Inland spools, the recessed end of the spool is on the wrong side for the RepWinder 15mm spacer.
This adapter uses the Prusament Base Cap from the RepWinder to extend the pins in to align the spool and hold it in place. Then fasten the spool in place using the Prusament Ring.
Print Instructions
Included 3MF file uses the same settings as the RepWinder, .2 layer height, Prusament PETG profile. I was able to print 5 for my MMU2S in 4 hours.
Designed in Fusion 360 and printed with Prusament Prusa Orange PETG on a MK3S/MMU2S.