Hyundai Tuscon Cellphone Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Keeps the phone upright and within view.
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 85
- Wydruki
- 0
- Wyświetlenia
- 1483
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I don't like to use adhesive or suction cup mounts in my vehicle so I designed this to fit in the console pocket in my 2017 Hyundai Tuscon.
Printed it in two parts with Prusament PLA. The main stand requires supports and in order to add a bit of weight to it I set the infill at 80%. The box to hold the phone needs to be printed standing up. I used a brim even though it probably doesn't need it and infill was also set to 80%. Resize the box according to the size of your phone if need be. I prefer a larger box in case I change my phone size. Once both pieces were printed I used some CA glue to set them together. Epoxy would work as well. There's lots of room to connect your charge cable.
V1: There is a cutout for a little Swiss Army Knife I like to keep handy as well as coin cheaters I use for grocery store carts.
V2: Removed cutouts
I have been using the original one for 2 years that I printed and it has been able to handle the heat of summer and cold of winter.
It will work in other model years providing you have the same console layout as I do.