Brush tray for - Gridfinity Stackable Citadel Paint Pot Storage REMIX
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Thought I'd add a brush tray which sits on top of the Gridfinity Stackable Citadel Paint Pot Storage.
- Ocena
- 5 / 5
- Polubienia
- 42
- Pobrania
- 263
- Wydruki
- 2
- Wyświetlenia
- 2331
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Currently I'm using a ReallyUsefulBox 9L, which has a gridfinity base, with the Citadel paint storage trays. I'm able to get two layers of paints and then two paint brush trays on the top layer (see pic). Any I plan to store other items in the box.
The brush tray doesn't have any brush holders/stops, just a tray.
It is 10mm deep and fits any selection of brushes. My current brushes have a wide handle, which is why I went with a 10mm recess. The trays then stack on each other.
I've added a 2x5 tray but I also made a 2x6 tray, if anybody needed a slightly longer model. The .f3d file can be downloaded if you want to make changes.
Files;
- Brush tray 2x5
- BrushTray 2x5 - brush tray as seen in the images
- BrushTray 2x5split/BrushTray 2x5split1 - same model but split if you've a smaller printer
- BrushTray 2x5without - this doesn't have the Citadel mounting hole, just a flush base
- Brush tray 2x6
- BrushTray 2x6 - brush tray as seen in the images
- BrushTray 2x6split/BrushTray 2x6split1 - same model but split if you've a smaller printer
- BrushTray 2x6without - this doesn't have the Citadel mounting hole, just a flush base
Designed to be used with a 0.4 nozzle but I printed with a 0.6 nozzle with a layer height of 0.4. Printed with PETG, which is why I need to clean the magnet area up.