6mm Supportless Mech - Boiler
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
6mm supportless mech miniature designed and tested for FDM printing.
- Ocena
- 5 / 5
- Polubienia
- 61
- Pobrania
- 288
- Wydruki
- 2
- Wyświetlenia
- 1368
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Miniature Gaming Accessories
- Licencja
- Creative Commons — Attribution
The boiler is a deeply outdated mech used by returned Exoplanetary Colonist to support their alien allies.
Supportless and easy to print on FDM, this 6mm mech prints in just 2 pieces! The bottom usually prints very easily but the top requires good bed adhesion so maybe add a little hairspray, glue stick, or brim if you're concerned about failures.
"When the Exoplanet colonists left Earth, many thought we would never hear from them again. Then one day, they returned with their now wildly-outdated mechs covered in strange symbols. They were accompanied by massive alien machines and weren't much for talking. Who are they to blame, we had turned their home planet into a wasteland..."