TRX4M Defender Rear Slim Bumpers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Tired of scraping rear bumper when you're pointed at the sky? Well this bumper is short and slim and tucks up nicely.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 120
- Wydruki
- 0
- Wyświetlenia
- 1045
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Traxxas TRX4M Defender rear bumper. Nice and slim so it doesn't scrape like the stock one does. Now the tire/tire cover will rub next. But that's a problem for another day… 3 different styles to suit your fancy. One is 1 piece the other 2 designs are 2 pieces. Also for those makers out there, you can build off my 2 pc mounts to design your own rear bumpers.
Uses short M2 screws. I would screw in screws 1st to tap the holes prior to assembling the bumper.
Print standing up with supports or upside down without supports.