1 / 1
Ender 3 V3 KE Bed Mesh Level Test (220x220mm - 5x5 Mesh) — zdjęcie 1

Ender 3 V3 KE Bed Mesh Level Test (220x220mm - 5x5 Mesh)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Simple Ender 3 V3 KE bed mesh levelling test print. Squares at every spot the bed is measured at.

Ocena
5 / 5
Polubienia
159
Pobrania
3208
Wydruki
3
Wyświetlenia
5754
Oceny
5

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Test Models
Licencja
Creative Commons — Attribution — Noncommercial

A test print file exactly 220x220mm with a height of 0.2mm (one layer) to match the Creality Ender V3 KE's build plate, with squares at the points where the auto levelling sensor touches the bed. 

This has the bonus of allowing you to analyze whether or not the CR-Touch sensor measurements are accurate or if any need adjusted.

Simply print at 0.2mm layer height and check the printed squares for any inconsistencies that would indicate too high or low a measurement point.

May work for other printers with a 220x220mm build plate that use a 5x5 bed mesh.