Hornby 00 Guage Track Separator
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Maintains track spacing on temporary oo guage layouts
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 67
- Wydruki
- 0
- Wyświetlenia
- 294
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
When building layouts on the floor kept having an issue where the slightest knock would cause all the track to go out of alignment, especially where two pieces of track joined. This would in turn cause derailments of the model trains.
This solution helps the track maintain a standard Hornby track spacing.
Reccomending reading this website to learn more about Hornby track spacings https://jonscaife.com/model-rail/track-geometries-for-00-gauge-hornby-setrack/
Can be used on strait and curved sections to keep spacing, usually between inner and outer loops but can also be used for sidings etc…
Have kept part small enough to print on 120mm bed, this is due to my most reliable printer for TPU being a small form factor printer
For use on smooth floors such ad tile reccomend printing in TPU for added grip. However is still able to maintain spacing when printed in PLA you just loose the grip element, which would be fine for carpeted surfaces
Reccomended print settings:
TPU
0.1mm layer height
40% infill
4-5 walls
5-6 top and bottom layers
PLA (and others)
0.2mm layer height
20% infill
3 walls
5 top and bottom layers