Garmin Tactix Charlie charging stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple charging stand for the Garmin Tactix Charlie watch
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 263
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a watch charging stand that I quickly designed for my Garming Tactix Charlie watch. It prints in 2 pieces so no supports are needed and super gluing the head onto the support pole is all that is required for post process.
It has been very sturdy and allows me to take some pressure off of the charging cable when it normally rests on its side on my bedside table. It also looks nicer having the watch presented if you want to wear a different watch one day.
Print Settings:
Filament used: Creality Hyper PLA
Infil: 25% gyroid
Layer Height: .2mm
Model weight: 83.69g
Print Time for me was 2h36m but that all depends on settings used