Supermassive Spool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A massive spool design made from your old cardboard filament spool into a new, much larger spool for material storage.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 14
- Wydruki
- 0
- Wyświetlenia
- 209
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
This design turns your re-usable cardboard filament spool (1kg) into a SUPERMASSIVE capacity spool for your garage or workshop.
PLA + material was used for testing, as the design is intended for stability and strength.
This is a large print, and will use quite a bit of filament. An MK3S+ machine was used for printing all 16 wedge shapes and the center pins/washers/nut. NO SUPPORTS NEEDED!
This spool could potentially hold all filament but would be VERY heavy (5kg or more). Use some discretion.
The design is completely original and I thought it up to hold my un-wieldy Xmas lights from Costco.
Some final testing and checking is still ongoing, please let me know if you have any questions.