Frieren staff
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Model from the staff used by Frieren in Frieren beyond journey end.
- Ocena
- 4,8 / 5
- Polubienia
- 112
- Pobrania
- 710
- Wydruki
- 6
- Wyświetlenia
- 4135
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Share Alike
Model of the staff frieren is using in the Anime Frieren, beyond journeys end
Made this staff to train a little more on my modelling skills.
It is for sure not perfect, if you want to have a go at it let me know. I can share the solid works files too.
The parts fit around a 22mm steel pipe normally used for radiators.
For the model i used a pipe that is 123cm long, this makes the whole model around 152cm long as some parts fit around the pipe. But the pipe length can be adjusted based on your own height.
To print everything you will need the following parts multiple times
Connection pin top 4X
Staff gem holder pin 3X
Staff gem 2X
Will be making the buttons on the jacket, earrings and piece at the end of the cloth on the staff later.
03-2024 Update
Added adhesion assist files for the rings that go around the pipe.
the first layer is filled for better adhesion, this can be easy removed after.
Test printed every part without any failures.
Only the bottom part i had to reduce print speed to 40%. Took a while longer but finished no problem.
Full assembly test done.
Latest pictures taken.
Removed from the W.I.P state as everything has been confirmed fitting.
Start working on the acessories.
05-2024
Realesed separate files for the acessories.