1 / 8
The Isle of Cats - Fish Pieces - Multi-color — zdjęcie 1
1 / 8

The Isle of Cats - Fish Pieces - Multi-color

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Multi-layered fish pieces (1 and 5) for Isle of Cats board game. For multi-color filament or single filament FDM printer

Ocena
5 / 5
Polubienia
18
Pobrania
114
Wydruki
1
Wyświetlenia
444
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Board Games
Licencja
Creative Commons — Attribution — Share Alike

I re-drew the vectors for both single and 5 fish pieces to be able to add multiple layer dimensinoality for multi-color/filament prints.

Printing these in 2 colors can be done on any single-extruder 3D printer, not just Bambu Labs AMS or Prusa MMU machines. Just get OrcaSlicer,

In Orcaslicer, you can add multiple filament presets (and select their color) even for machines that do not have multi-filament capabilities. If you do this, once sliced, slide the slider to the layers with the fish art, right-click, you can right click and do 'change filament > choice' and then re-slice and see the filament differences in the preview. Your machine will pause at each 'filament change' until you resume, allowing you to change the filament(color); and then pause again to change the filament back as many times as needed. see screenshot - Here's a tutorial for Bambu Studio, which is identical to OrcaSlicer: https://www.youtube.com/watch?v=IQmkcdXLMHU

If you don't want to go through the setup to add a second filament and/or don't care about pre-viewing, you can just add a pause, your machine will pause until you resume, allowing you to change the filament(color); and then pause again to change the filmanet back as many times as needed. Here's a tutorial for those who don't see the PAUSE command available when right clicking: https://www.youtube.com/watch?v=ieSEtNpzFcI&t=287s

Recommend turning ironing on for all top surfaces.

Print Settings

Printer Brand:

Creality

Printer:

K1

Rafts:

No

Supports:

No

Resolution:

0.12

Infill:

default

Filament: doesn't matter PLA your choice


Notes:

Turn ironing on for best results.

How I Designed This ===================

Converted STL to SVG in TinkerCAD; opened SVGs in Adobe Illustrator. Used Illustrator 2023's new capability of extruding and grouping 3D models from vectors, exported as .OBJ (scale gets lost with .obj) opened .obj in OrcaSlicer, placed files, resized to proper sizing, saved out as .stl.

Category: Toy & Game Accessories

Tagi