1 Nozzle 8 Colours 1 Scream
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is an experiment in producing multi-coloured replica images with a single material Mk3s.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 33
- Wydruki
- 0
- Wyświetlenia
- 889
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Test Models
- Licencja
- Creative Commons — Attribution — Noncommercial
This is an experiment in producing multi-coloured replica images with a single material Mk3s. The process from image to slts uses Gimp, Inkscape, Tindercad and Meshmixer (all free!). I will happily provide details of the processes if you message me. (I am self taught with all these programs so you may well come up with improved methods).
Slt and gcode files beginning p are for the detail of the image. I offer this so you can practice the print process.
Files beginning s are the main image.
Munch's The Scream is out of copyright.
I acknowledge topteny.com as the source of the image used.
Print instructions
This is not for the faint-hearted.
Slicer settings:
- Set loops to 0
- Verical shell perimeters 1
- Auto-generate support Off
- Z-Lift 1mm
Not included in the gcodes is bed temperature 80C (I did this by tuning each print)
The key to success is adhesion.
PEI steel sheet with glue stick.
I also adjusted my Live Z axis from -0.585 to -0.610.
Print order.
The frame comes last!
While you have a choice of colour order here are some tips:
Print larger files earlier
Print files with many small areas later
If any of your PLAs are worse at sticking to the bed do them last.
If zits appear use some nail clippers
Finally the print will stick! Tease up one corner and them work a ruler under the print to prise it off