Dial indicator bracket for Parktool truing stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A dial indicator bracket to hold a dial gauge and measure a wheel’s lateral tolerance. It is designed to fit a TS-2.2…
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 51
- Wydruki
- 0
- Wyświetlenia
- 681
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A dial indicator bracket to hold a dial gauge and measure a wheel’s lateral tolerance. It is designed to fit a TS-2.2 Truing Stand.
Hardware
2x M4x20
2x M4 nut
4x M5x20
4x M5 nut
2x circular aluminum tube r 8mm L 200 mm
dial gauge (mine has no support behind so I draw a rear cover to connect with the tube)
Attached you can find 3 files:
- the support to connect to the truing stand
- 90° connector
- back cover for my dial gauge
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
Yes
Resolution:
0.2
Infill:
25%
Filament: SunLu PETG Green
Notes:
none
Post-Printing
just assembly
How I Designed This
Designed in SolidWorks
Category: Sport & Outdoors